
AQUA ECOLOGIC | instructions for use, maintenance and installation |
September 2015
47
17. SAFETY MEASURES
The stove is equipped with the following safety devices:
- PRESSURE REGULATOR
Checks the pressure in the chimney. It stops the spiral conveyor of the pellets when the drain is clogged
or when there is pressure (wind).
- FLUE GASES TEMPERATURE SENSOR
Checks the temperature of flue gases that allow the stove to be turned ON or stop the ignition if the flue
gas temperature drops down below the programmed value.
- CONTACT THERMOSTAT ON THE SNAIL BASE
When the temperature goes over the set safety value the stove will turn off immediately.
- BOILER CONTACT THERMOSTAT
When the temperature goes over the set safety value the stove will turn off immediately.
- WATER TEMPERATURE SENSOR
When the water temperature comes close to the stop-
temperature (80 ° C) the sensor triggers the stove to
do a series of cooling cycles or turns the stove off automatically using the ECO-STOP in order to prevent
blocking of the above-described capillary temperature sensor.
service
Summary of Contents for Aqua ECOLOGIC
