Gorenje Aqua ECOLOGIC, Instructions For Use, Maintenance And Installation Manual, Page: 36 / 112

AQUA ECOLOGIC | instructions for use, maintenance and installation | September 2015
36
16.5. SIGNS AND MESSAGES ON THE DISPLAY
Signs on the pointers The meaning of the message and the status of the stove
OFF
1 2 :5 3
The stove is idle.
° OFF
1 2 :5 3
The stove is idle, but the time mode is activated, so that it turns on
automatically at the time that was set up.
TEST
FIRE
The stove checks whether there is adequate combustion and flame in the
combustion chamber. This process is activated after the power supply
interruption.
He a t
UP
In the ignition stage, after the screw conveyor fills the firebox, the lighter
heats up the pellets to ignition.
Fu e l
IGNI
After the Heat up phase the stove ignites the pellets. At this stage, there is
no dosage.
TST
IGNI
At the end of the ignition phase the lighter turns off the stove and examines
whether the ignition was successful, is the burning proper, and are the
temperatures increasing properly.
BURN
1 2 3 °
Burning phase (which is normally the working phase). Lower pointer shows
the temperature of the flue gases at the back end of the stove.
BURN
B78°
Burning phase, the lower display shows boiler water temperature.
BURN
R48°
Burning phase, the lower display shows the return line water temperature.
P5D5
R48°
The upper pointer shows the current power of the stove (Px) and the set up
power of the stove (Dx).
CLN
FIRE
Cleaning phase. The fan blows the ash and other debris from the firebox.
This phase occasionally runs automatically in the burning phase.