manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual

The GMC 2003 C4C042 Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and maintaining the GMC 2003 C4C042. Accessible, easy-to-use, and hassle-free – find the manual you need at manualshive.com.

Share
Download
background image

7-20

(39) = Air brake service:
j Inspect brake lines and hoses for proper hook

-

up,

binding, leaks, cracks, chafing, etc. Inspect drum
brake linings for wear or cracks. Inspect other brake
parts at each wheel, including drums, wheel
cylinders and piston heat shields, boots and wheel
speed sensor wiring. Check brake pedal for excessive
free play or travel (or every 6 months, whichever
occurs first) and have serviced if needed. Check
brakes more often if driving habits and conditions
result in frequent braking. Replace air dryer cartridge
only if excessive oil or moisture is present. A small
amount of oil in the system is normal and should not
be considered as a reason to replace the cartridge.

j Test air lines for leaks; tighten as needed. Replace

compressor filter.

j Inspect air parking brake chamber for leaks and

damage. Inspect lines and hoses for leaks, cracks,
chafing, etc. Also check all attachments for
tightness, wear or damage. Note: The spring brake
section of the rear brake diaphragms are
non

-

serviceable.

j Replace the air compressor filter element, mounted

on the air compressor. For remote air compressor
intake service, refer to engine air cleaner filter
replacement.

j Remove, disassemble, clean and inspect the safety

valve, standard brake chamber, quick release valve,
quick release/double check valve combination,
parking brake control valve, double check valve,
pressure protection valve and alcohol injector.

j Remove, disassemble and clean the application

valve; replace parts showing wear.

j Remove, disassemble, clean and inspect the spring

brake control valve; replace rubber parts.

(40) = Clean and lubricate air brake automatic slack
adjuster. Check pushrod travel and auto adjustment
operation. Have serviced if needed.

(41) = Air brake chamber service: Check operation,
mounting, clamps and air lines and check for leaks.

(42) = Trailer brake hand control valve service: Check
operation; lubricate cam and follower.

(46) = Tighten the wheel stud nuts to the specified
torque values at 100 miles (160 km). Thereafter, tighten
them 1,000 miles (1 600 km) after each time the wheel
is removed. See “Tightening the Wheel Nuts” in 
the Index.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 C4C042

Garnet MULTIRACK 688-S Manual preview
MULTIRACK 688-S
Brand: Garnet Pages: 14
Still RX70-16 Original Instructions Manual preview
RX70-16
Brand: Still Pages: 380
Still ECH 12 Original Instructions Manual preview
ECH 12
Brand: Still Pages: 110
U-Line H-1826 Manual preview
H-1826
Brand: U-Line Pages: 6
MATLOCK MTL-985-0998K Operator'S Manual preview
MTL-985-0998K
Brand: MATLOCK Pages: 2

Brands by name

Popular brands

Load more brands