manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 166 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 166

2-91

Exhaust Brake Indicator Light 
(If Equipped)

If your vehicle is equipped
with an exhaust brake, you
will have this light, located
above the comfort controls
in the center of the
instrument panel.

The exhaust brake indicator light will come on and stay
on whenever the diesel engine exhaust brake or exhaust
restrictor is active. For more information, see “Diesel
Engine Exhaust Brake” in the Index.

Diff Lock Indicator Light (If Equipped)

This light located in the
center of the instrument
panel is on when the
inter

-

axle differential 

lock system is in use.

The light will come on momentarily during starting. 
If the light fails to come on, have it repaired as soon 
as possible so you will be aware when the lock system 
is in use.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments