manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 159 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 159

2-84

Trailer Anti-Lock Brake System 
Warning Light

If your vehicle is connected
to an anti

-

lock brake system

equipped trailer, this light
should come on briefly, as 
a check, when you turn on
the ignition.

When this light comes on and stays on, it means there is
something wrong in the trailer anti

-

lock brake system.

Have the system repaired immediately.

If an anti

-

lock brake system equipped trailer is not

connected, this light is not functional.

Engine Coolant Temperature Gage

United States

Canada

This gage shows the engine coolant temperature. If the
gage pointer moves into the red area, your engine
coolant might have overheated and your engine may be
too hot. You should pull off the road, stop your vehicle
and turn off the engine as soon as possible.

See “Engine Overheating” in the Index. If you have a
Caterpillar

R

 diesel engine, also see your Caterpillar

R

Operation & Maintenance Manual.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments