manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 134 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 134

2-59

When it begins to get dark,
your DRL indicator light is
a reminder to turn the
headlamps on. The other
lamps that come on with
your headlamps, will also
come on.

When you turn the headlamps off, the regular lamps will
go off, and your low

-

beam headlamps will change to the

reduced brightness of DRL.

To idle your vehicle with the DRL off, set the parking
brake. The DRL will stay off until you release the
parking brake.

As with any vehicle, you should turn on the regular
headlamp system when you need it.

Marker Lamp Defeat Switch

If your vehicle has this feature, you can manually blink
the marker and clearance lamps.

The marker lamp 
defeat switch is located 
in the instrument panel
switchbank.

Press and hold the bottom of the switch to turn off 
the marker and clearance lamps. When you release 
the switch, the marker and clearance lamps will come
back on.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments