manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual

The GMC 2003 C4C042 Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and maintaining the GMC 2003 C4C042. Accessible, easy-to-use, and hassle-free – find the manual you need at manualshive.com.

Share
Download
background image

3-10

Adjusting the Speakers (Balance/Fade)

AUDIO: To adjust the balance between the right and 
the left speakers, press and release AUDIO until BAL
appears on the display. Then press and hold the up or 
the down arrow to move the sound toward the right or
the left speakers.

To adjust the fade between the front and the rear
speakers, press and release AUDIO until FAD appears
on the display. Then press and hold the up or the 
down arrow to move the sound toward the front or 
the rear speakers.

To adjust balance or fade to the middle position, select
BAL or FAD. Then press and hold AUDIO for more
than two seconds until you hear a beep. L and a zero or
F and a zero will appear on the display.

To adjust both tone controls and both speaker controls to
the middle position, end out of audio by waiting for the
display to change to the time display. Then press and
hold AUDIO for more than two seconds until you hear a
beep. CEN will appear on the display.

Fade may not be available if you have a regular 
cab model.

Radio Messages

CAL (Calibrated): Your audio system has been
calibrated for your vehicle from the factory. If CAL
appears on the display it means that your radio has not
been configured properly for your vehicle and must be
returned to the dealership for service.

LOC (Locked): This message is displayed when the
Theftlock

R

 system has locked up. Your vehicle must be

returned to the dealership for service.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 C4C042

Labrie ALLEY-GATOR RIGHT-HAND Operator'S Manual preview
ALLEY-GATOR RIGHT-HAND
Brand: Labrie Pages: 73
Crown Forklift Operator'S Manual preview
Forklift
Brand: Crown Pages: 21
SAC Turbo-Max 6100 Series Operator And Parts Manual preview
Turbo-Max 6100 Series
Brand: SAC Pages: 82
SAC MaxiMixer 2050 Operation And Maintenance Manual preview
MaxiMixer 2050
Brand: SAC Pages: 53
Vestil CARPET-D Instruction Manual preview
CARPET-D
Brand: Vestil Pages: 5
Kleton ML967 Instruction Manual preview
ML967
Brand: Kleton Pages: 8
Efco SWAPLOADER SL-145 Parts And Operation Manual preview
SWAPLOADER SL-145
Brand: Efco Pages: 99
Efco SWAPLOADER SL-185 Parts And Operation Manual preview
SWAPLOADER SL-185
Brand: Efco Pages: 109
Dodge RAM 2017 Owner'S Manual preview
RAM 2017
Brand: Dodge Pages: 228
Dodge RAM 1500 2018 Diesel Supplement preview
RAM 1500 2018
Brand: Dodge Pages: 230
Dodge D250 1990 Service Manual preview
D250 1990
Brand: Dodge Pages: 482

Brands by name

Popular brands

Load more brands