manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 168 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 168

2-93

Fuel Gage

Your fuel gage is located on
the right side of your
instrument panel cluster.

When the ignition is on, your fuel gage lets you know
about how much fuel you have left. When the gage first
shows empty, you’ll still have a little fuel left, but you
should get more fuel soon.

If your vehicle has dual fuel tanks, the reading on the
gage is the total fuel left in both tanks.

Here are four concerns of some operators. None of these
shows a problem with your fuel gage:
D The gage moves a little when you turn a corner or

speed up.

D The gage doesn’t go back to empty when you turn

off the ignition.

D At the gas station, the pump shuts off before the gage

reads full.

D It takes a little more or less fuel to fill up than the

gage indicated.

If you have a diesel engine, also see your Caterpillar

R

Operation & Maintenance Manual.

Water in Fuel Warning Light (If Equipped)

If your vehicle is equipped
with a diesel engine, you
may have this light

This light will come on to warn you that there is water
in the fuel system. For more information on how this
light works, see “Diesel Fuel Requirements and Fuel
System” in the Index.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments