manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 242 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 242

5-17

6. Turn the stud nut

clockwise several turns
to release the brakes.
Follow the same
procedure to release the
other brake.

7. At the repair facility, apply air pressure of at least

70 psi (480 kPa) to the brake chambers, either from
an external air supply or the vehicle’s air system.

8. Turn the stud nut counterclockwise several turns.

Remove the stud from the chamber.

9. Replace the stud and washer and tighten the nut

into the side of the chamber.

10. Replace the rubber cap.

Engine Overheating

You will find a coolant temperature warning gage on
your vehicle’s instrument panel, as well as a low coolant
warning light. Your vehicle also has a check gages
warning light on the instrument panel.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments