manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual

The GMC 2003 C4C042 Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and maintaining the GMC 2003 C4C042. Accessible, easy-to-use, and hassle-free – find the manual you need at manualshive.com.

Share
Download
background image

5-10

Towing Your Vehicle

CAUTION:

To help avoid serious personal injury to you 
or others:
D Never let passengers ride in a vehicle that is

being towed.

D Never tow faster than safe or posted speeds.

D Never tow with damaged parts not fully

secured.

D Never get under your vehicle after it has

been lifted by the tow truck.

D Always secure the vehicle on each side with

separate safety chains when towing it.

D Working on air brakes without first using

the release studs to compress the springs
can lead to injury. Never work on the air
brakes chambers without first using the
release studs to compress the brake springs.

CAUTION: (Continued)

CAUTION: (Continued)

D When the brake springs are manually

compressed, you will have no brakes.
Release your air

-

operated parking brakes

manually only to tow the vehicle. Never
drive the vehicle with the brakes released.

Consult your dealer or a professional towing service if
you need to have your vehicle towed. They can provide
the right equipment and know

-

how to tow it without

damage. See “Roadside Assistance” in the Index.

Before you do anything, turn on the hazard warning
flashers (if they have not been damaged).

When you call, tell the towing service:
D That your vehicle has rear

-

wheel drive.

D The make, model and year of your vehicle.
D Whether you can still move the shift lever.
D If there was an accident, what was damaged.
When the towing service arrives, let the tow operator
know that this manual contains towing instructions. 
The operator may want to see them.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 C4C042

HOMCOM 370-177 Assembly Instruction Manual preview
370-177
Brand: HOMCOM Pages: 6
Volvo A35E FS Operator'S Manual preview
A35E FS
Brand: Volvo Pages: 202
Eoslift E20M Operating Instructions Manual preview
E20M
Brand: Eoslift Pages: 14
Magliner B4K128HM4 Assembly Instructions preview
B4K128HM4
Brand: Magliner Pages: 4
Vestil EPT Series Operation And Maintenance Manual preview
EPT Series
Brand: Vestil Pages: 20
URAL Motorcycles 4320M Operation Manual preview
4320M
Brand: URAL Motorcycles Pages: 321
Ford Cargo 2017 Owner'S Manual preview
Cargo 2017
Brand: Ford Pages: 240
Efco SWAPLOADER SL-145 Parts And Operation Manual preview
SWAPLOADER SL-145
Brand: Efco Pages: 99
Efco SWAPLOADER SL-185 Parts And Operation Manual preview
SWAPLOADER SL-185
Brand: Efco Pages: 109

Brands by name

Popular brands

Load more brands