manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual

The GMC 2003 C4C042 Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and maintaining the GMC 2003 C4C042. Accessible, easy-to-use, and hassle-free – find the manual you need at manualshive.com.

Share
Download
background image

6-22

Checking Engine Oil

It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.

The engine oil dipstick 
is located in the engine
compartment on the 
driver’s side of the vehicle.

Turn off the engine and give the oil several minutes to
drain back into the oil pan. If you don’t, the oil dipstick
might not show the actual level.

Pull out the dipstick and clean it with a paper towel or
cloth, then push it back in all the way. Remove it again,
keeping the tip down, and check the level.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 C4C042

WorkSmart WS-MH-PALL-006 Owner Operational Manual preview
WS-MH-PALL-006
Brand: WorkSmart Pages: 5
Roto-Mix Roto-Spread 702-17 Operator'S Manual, Maintenance And Repair Parts preview
Roto-Spread 702-17
Brand: Roto-Mix Pages: 53
Roto-Mix 1220-20 Safety & Operation Manual preview
1220-20
Brand: Roto-Mix Pages: 65
Roto-Mix 720-16 Operations & Parts Manual preview
720-16
Brand: Roto-Mix Pages: 79

Brands by name

Popular brands

Load more brands