manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 275 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 275

6-21

Among those acts presumed to constitute tampering are
the acts listed below.

Insulation:
D Removal of the noise shields or any underhood

insulation.

Engine:
D Removal or rendering engine speed governor 

(if equipped) inoperative so as to allow engine 
speed to exceed manufacturer specifications.

Fan and Drive:
D Removal of fan clutch (if equipped) or rendering

clutch inoperative.

D Removal of the fan shroud (if equipped).
Air Intake:
D Removal of the air cleaner silencer.
D Modification of the air cleaner.
Exhaust:
D Removal of the muffler and/or resonator.
D Removal of the exhaust pipes and exhaust 

pipe clamps.

Engine Oil (Gasoline Engine)

If the low oil light appears
on the instrument cluster, it
means you need to check
your engine oil level right
away. For more
information, see “Low Oil
Light” in the Index.

You should check your engine oil level regularly; this is
an added reminder.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments