manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 245 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 245

5-20

Cooling System

When you decide it’s safe to lift the hood, here’s what
you’ll see:

A. Engine Fan

B. Coolant Surge Tank

If your vehicle has a Caterpillar diesel engine, see the
Caterpillar

R

 Diesel Engine Operation and Maintenance

Manual provided with your vehicle.

If the coolant inside the coolant surge tank is boiling,
don’t do anything else until it cools down. The vehicle
should be parked on a level surface.

The coolant level
should be at COLD
FILL or higher. If it
isn’t, you may have a
leak at the pressure cap
or in the radiator
hoses, heater hoses,
radiator, water pump
or somewhere else in
the cooling system.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments