manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual

The GMC 2003 C4C042 Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and maintaining the GMC 2003 C4C042. Accessible, easy-to-use, and hassle-free – find the manual you need at manualshive.com.

Share
Download
background image

7-4

Part A: Scheduled Maintenance
Services

Using Your Maintenance Schedule

We at General Motors want to help you keep your
vehicle in good working condition. But we don’t know
exactly how you’ll drive it. You may drive very short
distances only a few times a week. Or you may drive
long distances all the time in very hot, dusty weather.
You may use your vehicle in making deliveries or in
many other ways.

Because of all the different ways people use their
vehicles, maintenance needs vary. You may need more
frequent checks and replacements. So please read the
following and note how you drive. If you have any
questions on how to keep your vehicle in good
condition, see your dealer.

This part tells you the maintenance services you should
have done and when you should schedule them. If you
go to your dealer for your service needs, you’ll know
that GM

-

trained and supported service people will

perform the work using genuine GM parts.

The proper fluids and lubricants to use are listed in
Part C. Make sure whoever services your vehicle uses
these. All parts should be replaced and all necessary
repairs done before you or anyone else drives 
the vehicle.

This schedule is for vehicles that:
D carry passengers and cargo within recommended

limits. You will find these limits on your vehicle’s
GVW Rating label. See “Loading Your Vehicle” in
the Index.

D are driven on reasonable road surfaces within legal

driving limits.

D use the recommended fuel. See “Fuel” in the Index.

Scheduled Maintenance Supplements

If your vehicle has a Caterpillar

R

 diesel engine, your

owner’s manual is supplemented by the Caterpillar

R

Diesel Engine Operation & Maintenance Manual. If
your vehicle has an Allison transmission, your owner’s
manual is supplemented by an Allison Transmission
Operator’s Manual. Always refer to these manuals for
related maintenance services.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 C4C042

Jacobsen SV 3422 Gas Operator'S Manual preview
SV 3422 Gas
Brand: Jacobsen Pages: 23
Volvo VHD 2003 Service Manual preview
VHD 2003
Brand: Volvo Pages: 68
HSC ELITE E2500PTS Product Manual preview
ELITE E2500PTS
Brand: HSC Pages: 13
Mack LRBE Emergency Response Manual preview
LRBE
Brand: Mack Pages: 12

Brands by name

Popular brands

Load more brands