manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 162 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 162

2-87

Oil Pressure Gage

United States

Canada

The engine oil pressure gage, on the lower right portion
of your instrument panel cluster, shows engine oil
pressure in psi (pounds per square inch) or in kPa
(kilopascals). Oil pressure may vary with outside
temperature and oil viscosity, but readings of 30 to
40 psi (205 to 275 kPa) on gasoline engines at operating
temperature and moderate road speeds are normal. If
you have a diesel engine, the normal operating range
should be between 35 and 70 psi (240 to 480 kPa).

A reading in the low pressure zone may be caused by a
dangerously low oil level or other problem.

If you have a Caterpillar

R

 diesel engine, also see your

Caterpillar

R

 Operation & Maintenance Manual.

CAUTION:

Don’t keep driving if the oil pressure is low. If
you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have your
vehicle serviced.

NOTICE:

Damage to your engine from neglected oil
problems can be costly and is not covered by 
your warranty.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments