manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 292 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 292

6-38

Adding Coolant

If you need more coolant, add the proper DEX

-

COOL

R

coolant mixture at the surge tank, but only when the
engine is cool.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

When replacing the pressure cap, make sure it is
hand

-

tight.

Engine Coolant (Caterpillar

R

 

Diesel Engine)

If your vehicle has a Caterpillar diesel engine, see the
Caterpillar

R

 Diesel Engine Operation & Maintenance

Manual provided with your vehicle to find out what to
add, also when and how to service your cooling system.

Surge Tank Pressure Cap

The surge tank pressure cap
is located in the engine
compartment, on the
driver’s side of the vehicle.

The surge tank pressure cap must be tightly installed.

NOTICE:

Your surge tank pressure cap is a 15 psi (103kPa)
pressure

-

type cap for use with medium duty

cooling systems only. It must be tightly installed
to prevent coolant loss and possible engine
damage from overheating.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments