GMC 2003 C4C042 Owner'S Manual Download Page 10

Page: 10 / 386

1-3

Split Bench Seat (If Equipped)

If your vehicle has a split bench seat, your seat is fixed
and is not able to be adjusted.

Air Suspension Seats (If Equipped)

If your vehicle has the low

back suspension seat, there

are six ways you can adjust the seat.

If your vehicle has the high

back air suspension seat,

there are five ways you can adjust the seat.

Height Adjustment

The suspension seat height
adjustment lever is located
on the front inboard side of
the seat.

To adjust the height of the air suspension seat, pull the
lever up to inflate. Push the lever down to deflate.

The seat cushion itself can also be raised or lowered.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Search results

Summary of Contents for 2003 C4C042

Reviews:

GMC 2003 C4C042, Owner'S Manual, Page: 10 / 386

Search results

Summary of Contents for 2003 C4C042

Reviews: