manualshive.com logo in svg

GMC 2003 C4C042, Owner'S Manual, Page: 202 / 386

Share
Download
GMC 2003 C4C042 Owner'S Manual Download Page 202

4-9

The anti

-

lock system can change the brake pressure

faster than any driver could. The computer is
programmed to make the most of available tire and road
conditions. This can help you steer around the obstacle
while braking hard.

As you brake, your computer keeps receiving updates on
wheel speed and controls braking pressure accordingly.

Remember: Anti

-

lock doesn’t change the time you need

to get your foot up to the brake pedal or always decrease
stopping distance. If you get too close to the vehicle in
front of you, you won’t have time to apply your brakes
if that vehicle suddenly slows or stops. Always leave
enough room up ahead to stop, even though you have
anti

-

lock brakes.

Using Anti

-

Lock

Don’t pump the brakes. Just hold the brake pedal down
firmly and let anti

-

lock work for you. You may feel the

brakes pulsate, or you may hear air exhausting, but this
is normal.

Braking in Emergencies

With anti

-

lock, you can steer and brake at the same

time. In many emergencies, steering can help you more
than even the very best braking.

Summary of Contents for 2003 C4C042



































































































































































































































































































































































































Reviews:

No comments