Service
FlexPay Maintenance Tool Advanced Mode
Page 4-6
MDE-4771H Encore® S Enhanced FlexPay™ EMV® CRIND® Start-up/Service Manual · November 2019
Contrary to activation, the deactivation procedure does not require keypad entries. Therefore,
no options are available in the menu. When the system sensors detect that a module with
mounting sensors is dismounted, it automatically self-deactivates the FlexPay EMV CRIND.
The activation procedure must be repeated.
At each power up, if the FlexPay EMV CRIND main processor detects a module whose sensor
has disengaged, it will automatically enter the Service Menu (GREEN screen). For a
description of the various diagnostics screens, refer to
“Appendix A- Diagnostic Screens”
on
.
FlexPay Maintenance Tool Advanced Mode
Setting up Laptop
Note: Only done one time before updating all the FlexPay EMV CRIND devices.
Configure the laptop’s TCP/IP address as 10.5.48.1 as the FlexPay EMV CRIND devices will
be on the same subnet at 10.5.48.XX.
To set up the laptop, proceed as follows:
1
Click the
Local Area Connection
icon on your laptop. The Local Area Connection Status
window opens.
Figure 4-10: Local Area Connection Status Window
