Service
Replacing and Activating FlexPay EMV CRIND
Page 4-2
MDE-4771H Encore® S Enhanced FlexPay™ EMV® CRIND® Start-up/Service Manual · November 2019
Configuring/Activating FlexPay EMV CRIND
To activate the FlexPay EMV CRIND, you must enter the Service Menu. To enter the Service
Menu and perform the activation, proceed as follows:
1
Power up the FlexPay EMV CRIND. The PPN is displayed on the screen. Note the eight digit
serial number when the unit first powers up. The right-most six digits of the serial number is
the password for the Service Menu.
Note: The message, “Out of Service” normally is displayed when the unit first powers up.
Figure 4-1: Powering up FlexPay EMV CRIND
The PPN is also printed on the rear of the unit.
Figure 4-2: PPN on Rear of FlexPay EMV CRIND Unit
Location of PPN
