Gestetner A294, Service Manual

Page: 288 / 600

SERVICE PROGRAM MODE
A294/A295 4-60 SM
4.2.4 INPUT CHECK
Main Machine Input Check (SP5-803)
1. Access SP mode SP5-803.
2. Select the class 3 number that accesses the switch or sensor to be checked.
3. Check the status of the sensor or switch.
NOTE: To change to another class 3 level, press the “Next” or “Prev.” key.
4. The reading (“0” or “1”) will be displayed. The meaning of this is as follows.
Bit 7
0
Bit 6
0
Bit 5
0
Bit 4
0
Bit 3
0
Bit 2
0
Bit 1
0
Bit 0
0
5. Press the copy mode to return to the normal screen. Select a quantity, press
start and return to SP mode to view the changing bits.
Reading
Class 3
No.
Bit
No.
Description
0 1
7 Not Used
6 Not Used
5
LCT 3rd Paper End Sensor
(6th tray)
Not paper end Paper end
4
LCT 2nd Paper End Sensor
(5th tray)
Not paper end Paper end
3
LCT 1st Paper End Sensor
(4th tray)
Not paper end Paper end
2 3rd Paper End Sensor Not paper end Paper end
1 2nd Paper End Sensor Not paper end Paper end
1
0 1st Paper End Sensor Not paper end Paper end
7 Not Used
6 Not Used
5
LCT 3rd Paper Feed Sensor
(6th tray)
Paper detected No paper
4
LCT 2nd Paper Feed Sensor
(5th tray)
Paper detected No paper
3
LCT 1st Paper Feed Sensor
(4th tray)
Paper detected No paper
2 3rd Paper Feed Sensor Paper detected No paper
1 2nd Paper Feed Sensor Paper detected No paper
2
0 1st Paper feed Sensor Paper detected No paper
7 Not Used
6 Duplex Entrance Sensor Detected Not detected
5 Duplex Jogger H.P. Not detected Detected
4 Duplex Transport 3 Sensor Detected Not detected
3 Duplex Transport 2 Sensor Detected Not detected
3
2 Duplex Transport 1 Sensor Detected Not detected
Rev. 2/2000
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA