Gestetner A294, Service Manual

Page: 343 / 600

DOCUMENT FEEDER
SM 6-13 A294/A295
Repl
ac
em
ent &
Adj
us
tm
ent
Exit Sensor and Inverter Sensor
Exit Sensor
1. Remove the front and rear covers.
2. Remove the exit guide unit [A] (4 screws).
3. Replace the exit sensor [B] (1 connector).
NOTE: When reinstalling the exit guide unit, make sure that the guide plate [C]
on the exit unit is over the exit gate [D].
Inverter Sensor
1. Remove the front and rear covers.
2. Remove the right lower cover [E] (4 screws).
3. Remove the guide plate [F] (3 screws).
4. Replace the inverter sensor [G] (1 connector).
B301R509.WMF
B301R508.WMF
[C]
[D]
[G]
[E]
[A]
[B]
[F]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA