Gestetner A294, Service Manual

Page: 285 / 600

Rev. 9/2001 SERVICE PROGRAM MODE
SM 4-63 A294/A295
Serv
ic
e
Ta
b
le
s
Mode No.
(Class 1, 2 and 3)
Function Settings
ROM Version Display 7-801
Displays the ROM versions.
001: SICU
002: BCU
003: CSS (P1) – Japan only
004: HDC (Hard disk controller)
005: Scanner
006: ADF
007: Finisher
008: Printer
PM Counter Display 7-803
S Displays the PM counter since the last PM.
PM Counter Reset 7-804
Resets the PM counter. Start
SC/Jam Counter Reset 7-807
Resets the SC and jam counters. Press
“Start” to reset. Start
Counter Clear 7-808
Resets all counters, except for the total
counters (SP 7-003):
Press “Start” to reset. Start
Access Code Clear 7-810
Resets both the key operator code and the
weekly timer code (‘key operator code for
off setting’). Press “Start” to reset. Start
Copy Counter Clear- Paper Tray
1 Paper Tray 1
2 Paper Tray 2
3 Paper Tray 3
4 Paper Tray 4
5 Paper Tray 5
7-816
6 Paper Tray 6
Resets the total copy counter by paper
tray. These SP modes can be used after
replacing the pick-up, feed, and separation
rollers in the paper feed stations. Start
Total ADF Counter Reset 7-817
Resets the ADF Counter (SP7-205). Press
“Start” to reset. Start
Copy Counter Clear - Magnification 7-822
Resets all counters of SP7-301. Start
Total Counter Clear
Resets the electrical total counter.
7-825
Usually, this SP mode is done at
installation.
This SP mode works only once when the
counter value is negative.
Start
Option Counter Error Counter
1 Total S
7-826
2 Staple S
For Japanese version only.
Option Counter Error Counter Clear 7-827
For Japanese version only.
Punch Counter Clear 7-828
Resets the punch counter (SP7-207)
4-58e
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA