Gestetner A294, Service Manual

Page: 270 / 600

SERVICE PROGRAM MODE Rev. 9/2001
SM 4-48 A294/A295
Mode No.
(Class 1, 2 and 3)
Function Settings
Counter Up Timing
Determines the key counter count up
timing.
0: The key counter counts up at paper feed
timing.
1: The key counter counts up when the
paper exits to the finisher tray.
5-121
S
This setting does not affect the timing of the
copier total counter.
0: Feed
1: Exit
APS Mode 5-127
S
Selects the availability of APS mode.
0: APS can be used
1: APS cannot be used
0: Yes
1: No
Paper Size Type Selection
Selects the paper size type (for originals
and copy paper). (The default setting
depends on the settings of DIP SW 1 and 2
on the SICU.)
5-131
B
After changing the value, turn the main
power switch off and on.
0: Japan
1: North
America
2: Europe
3: China
Paper Print Setting
3 Page Print
Position Side -
Side to Side
S
Adjusts the page print position for the
reverse side when compared to the front
side. –10 (To the right) ~ 10 (To the left) –10 ~ 10 mm
1 mm/step
0
5-212
4 Page Print
Position Up and
Down
S
Adjusts the page print position for the
reverse side when compared to the front
side. –10 (Upper) ~ 10 (Lower) –10 ~ 10 mm
1 mm/step
0
PM Alarm Interval
Set the PM alarm interval. A message is
displayed on the screen when the PM
counter reaches this value x 1,000.
5-501
S
The message can be turned off by the
following procedure: Clear Modes key – 0 –
Clear key – 0 – Clear key (hold for more
than 3 seconds). However, the PM counter
is not cleared. To clear the PM counter, use
SP7-804.
0 ~ 999 (k)
0 (No PM
Alarm)
Jam Alarm Interval (RDS Function)
1 Jam Alarm
Level
S
Japanese version only. Do not change
the setting. 0: Z
1: L
2: M
3: H
5-504
2 Jam Alarm
Long Time
S
Japanese version only. Do not change
the setting. 0: OFF
1: ON
Error Alarm (RDS Function) 5-505
S
Japanese version only. Do not change
the setting. 0 ~ 255 (k)
30 k
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA