Gestetner A294, Service Manual

Page: 553 / 600

ROM HISTORY
SM 8-35 A294/A295
3,000-Sh
ee
t
Finisher
B30
2
4.7 ROM HISTORY
4.7.1 FIRMWARE MODIFICATION HISTORY
B302 FINISHER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL NUMBER
First Production
B3025103 B From 1st production
Corrects the following:
•
SP6-120 Staple Jogger Adjustment was missing. The
staple jogger positions for each paper size can be
adjusted by SP6-120. This modification becomes
effective when the mainframe firmware is updated to
version 7.23.2 (F) or later.
B3025103 C February ’00
production
Staple Jogger Adjustment
1 A3
2 B4
3 A4 L
4 A4 S
5 B5 L
6 B5 S
7 DLT L
8 LG L
9 LT L
10 LT S
6-120
11 Others
S Adjusts the staple jogger positions for
each paper size. +1.5 ~ -1.5
0.5 mm/step
0 mm
Corrects the following:
•
Door open is indicated after a staple job
•
After a staple job, the Staple Unit does not move to
the staple supplying position in the staple end
condition.
•
Stapled sheets of paper fed out incorrectly when the
interrupt function is used during printing.
•
(A295 w/B302 only) Mistake-stapling, mistake-
jogging, R2 Jam, R6 Jam.
B3025103 D March ’00
production
Corrects the following:
•
(A295 w/B302 only) Tab paper stack failure, exit
paper jam in different paper length paper shift.
B3025103 E April ’00 production
Rev. 08/2000
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA