Gestetner A294, Service Manual

Page: 246 / 600

SERVICE PROGRAM MODE Rev. 9/2001
SM 4-24 A294/A295
Mode No.
(Class 1, 2 and 3)
Function Settings
Toner Density Correction 2-968
B
To prevent the image density dropping
during continuous copying after a long
interval (this is caused by a sudden
increase of Q/M), V
REF
is changed by –
0.06 V every (100 X (SP2-974 value + 1))
prints. This correction is applied from when
the auto process control is done, until “(the
number of prints set in this SP mode) X
(SP2-974 value +1)” has been made.
0 ~ 20 k
1 k prints/step
0
ID Sensor Pattern Interval – Multicopy 2-969
B
Twenty ID patterns are made in a 1-minute
interval during a continuous copy process
just after the process control is completed.
Image density will be stabilized. However,
the printing productivity will be decreased. OFF
ON
Toner Suction System 2-970
Displays whether the toner suction system
is installed in order to distinguish between
A294/A295
I and A294/A295 II.
[A294/A295 I ]
0: Not installed
[A294/A295
II ]
1: Installed
Collected Toner Level Check
Check this mode when “Waste toner full” pop-up message comes up or “Near full”
message is displayed.
1 Left Toner
Collection Bottle Display whether the used toner collection
bottle is full or not. 0: Not full
2: Full
2 Toner
Collection Bottle Display whether the sucked toner collection
bottle is full or not.
(A294/A295
II
models only)
0: Not full
1: Near full
2: Full
2-971
3 Toner Suction
Motor Displays whether the toner suction motor
needs to be replaced or not.
(A294/A295
II models only)
0: Not needed
1: Needed
soon
2: Needed
Sucked Toner Collection Bottle Operation Time
Displays the total operation time of the
toner suction motor to maintain the sucked
toner collection bottle replacement.
<Preset Values>
Near full: 280 hours, Full: 300 hours
2-972
B
Reset the value to 0 (zero) by pressing 0
and # (Enter) keys when the bottle is
replaced.
XXX hours
Toner Suction Motor Operation Time
Displays the total operation time of the
toner suction motor to maintain the toner
suction motor replacement.
<Preset Values>
Near full: 570 hours, Full: 600 hours
2-973
B
Reset the value to 0 (zero) by pressing 0
and # (Enter) keys when the bottle is
replaced.
XXX hours
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA