manualshive.com logo in svg

Gestetner A294, Service Manual

Share
Download
Gestetner A294 Service Manual Download Page 136

PAPER FEED

A294/A295

2-86

SM

Side Fence Drive

The side fences [A] of the right tray are normally closed. They open only when
paper in the left tray is moving to the right tray.

The side fence solenoids [B] drive the side fences. When the paper loaded in the
left tray transfers to the right tray, the side fence solenoids turn on to open the side
fences until the side fence open sensors [C] activate.

When the rear fence in the left tray has pushed the stack of paper into the right
tray, the side fence solenoids turn off to close the side fences. Then, when the side
fence closed sensors [D] actuate, the LCD displays a message advising the user to
load some paper into the left side of the tandem tray.

A294D706.WMF

[B]

[B]

[C]

[D]

[A]

[A]

[C]

[D]

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for A294

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands