Gestetner A294 Service Manual Download Page 299

Page: 299 / 600

SERVICE PROGRAM MODE

4-71

A294/A295

Serv

4.2.8 SOFTWARE RESET

The software can be reset when the machine hangs up. Do either of the following.

Either:

Turn the main power switch off and on.

Or:

Hold down the “#” key and “

” key at the same time for over 10 seconds.

4.2.9 SYSTEM SETTING AND COPY SETTING (UP MODE) RESET

System Setting Reset

The system settings in the UP mode can be reset to their defaults using the
following procedure.

1. Make sure that the machine is in the copier standby mode.

2. Press the User Tools key.

3. Hold down the “#” key and touch the “System Setting” key.

4. A confirmation message will be displayed, then press “Yes”.

Copy Features Reset

The copy settings in the UP mode can be reset to their defaults using the following
procedure.

1. Make sure that the machine is in the copier standby mode.

2. Press the User Tools key.

3. Hold down the “#” key and touch “Copy Features” key.

4. A confirmation message will be displayed, then press “Yes”.

Rev. 6/2000

CÓPIA NÃO CONTROLADA

Summary of Contents for A294

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for A294

Reviews:

Brands by name

Popular brands

Gestetner A294, Service Manual

Search results

Summary of Contents for A294

Reviews:

Brands by name

Popular brands