Gestetner A294, Service Manual

Page: 173 / 600

ENERGY SAVER MODES
SM 2-123 A294/A295
D
e
ta
ile
d
D
e
scri
p
ti
o
n
s
Weekly Timer Off Mode
Weekly Timer
The user can program ‘on periods’ and ‘off periods’ for each day of the week.
Entering Weekly Timer Off Mode
The machine enters this mode when:
•
The auto off timer runs out after the end of a job, and the weekly timer has
already reached the start of an off period
•
The operation switch is pressed to turn the power off, and the weekly timer
has already reached the start of an off period
•
The weekly timer reaches the start of an off period while in Off Mode.
What Happens in Weekly Timer Off Mode
When the machine enters this mode, the operation switch turns off automatically.
The fusing lamp and all dc supplies 5VE (+5V for energy saver mode) turn
off. At this time, only the main power LED is lit.
Operation
Switch
Energy
Saver LED
Fusing Temp. 5 V
Main Power
LED
Off Off
Room Temp.
(Fusing lamp off)
Off On
NOTE: Only +5 VE is supplied to the SICU.
LED (+5 V) is supplied to the operation panel from the SICU.
Returning to Stand-by Mode
If a weekly timer code (Key Operator Code for Off Setting - UP mode) is set, the
machine returns to stand-by mode when the operation switch is pressed and the
weekly timer code is entered.
If a weekly timer code is not set, the machine returns to stand-by mode when the
operation switch is pressed.
Printing Received Data
If no weekly timer code is set:
If the machine receives print data from a PC, the fusing temperature rises to print
the data. However, the operation panel stays off. After completing the print job, the
machine returns to weekly timer off mode.
If a weekly timer code is set:
When print data is sent from a PC, the printer stays off-line. After someone enters
the weekly timer code, the printer will go on-line and print the data.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA