Gestetner A294 Service Manual Download Page 192

Page: 192 / 600

COPIER (A294)

A294/A295

3-10

25. Install the upper [A] (3 screws) and lower [B] (3 screws) covers of the operation

unit holder.

26. Set the dust filter [C] as shown.

27. Set the optics dust filter [D] as shown.

28. Loosen the two screws [E] of the bracket [F]. Then set the original exit tray [G].

29. Secure the original exit tray with 2 - M4 x 12 screws [H] and 1 M4 x 8 screw [I].

NOTE:

Do not use these M4 x 12 screws for securing the other exterior covers.

They might hit a moving part inside the machine and damage that part.

30. Secure the bracket [F] to the operation unit arm with screw [I]. Then retighten

the two screws [E] to secure the bracket to the original exit tray.

31. Reinstall the right upper cover [J].

32. Plug in the power cord and turn the main switch on. Put toner bottle(s) in the

toner bank.

A294I016.WMF

A294I017.WMF

A294I018.WMF

A294I506.WMF

[A]

[E]

[G]

[C]

[B]

[F]

[D]

[I]

[H]

[J]

CÓPIA NÃO CONTROLADA

Summary of Contents for A294

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for A294

Reviews:

Related manuals for A294

Brands by name

Popular brands

Gestetner A294, Service Manual

Search results

Summary of Contents for A294

Reviews:

Related manuals for A294

Brands by name

Popular brands