Gestetner A294, Service Manual

Page: 237 / 600

Rev. 9/2001 SERVICE PROGRAM MODE
SM 4-15 A294/A295
Serv
ic
e
Ta
b
le
s
Mode No.
(Class 1, 2 and 3)
Function Settings
Web Motor Control
1 Web
Consumption
B
Displays the percentage of the web
consumption in 1% steps (0% ~ 107%).
The value can be manually input using
number keys.
2 Web Motor
Drive Interval
B
Change the interval of copy operation time
after which the web motor is driven [A294/A295 I ]
15 ~ 130
1 s/step
[A294
I
] 42 s
[A295
I
] 34 s
[A294/A295 II ]
3 ~ 130
1 s/step
[A294
II ]
11 s (EU)
21 s (US)
[A295 II ]
9 s (EU)
17 s (US)
3 Web Motor
Drive Time
B
Changes the time that the web motor is
driven. [A294/A295 I ]
0.1 ~ 3.0
0.1 s/step
0.8 s
[A294/A295 II ]
0.3 ~ 3.5
0.1 s/step
2.8 s
Changes the web consumption ratio at
which web near end is displayed.
1-902
4
Web Near End
Setting
B
About 40k A4 copies can be made after the
web consumption reaches 100%.
0 ~ 105
1%/step
[A294/A295
I ]
100%
[A294/A295 II ]
86% (EU)
90% (US)
Duplex Stop Position – Right 1-906
B
Changes the paper stop position in the
duplex unit after passing duplex transport
sensor 2.
For designer use only.
–10 ~ 10
2 mm/step
–8 mm
Charge Corona Bias Adjustment
Adjusts the voltage applied to the grid plate
during copying when auto process control
is
off .
2-001
1 Image Area
(Auto Process
Control OFF)
B
Normally, there is no need to adjust this.
If there is an ID or TD sensor problem, the
machine goes into fixed toner supply mode.
After replacing the drum or charge corona
wire, change this value to the default.
–600 ~ –1,300
10 V/step
–1,000 V
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA