X500pro
3D printer manual
DRAFT
German
RepRap
15. Important Notices
On the following pages, you will find important information and tips about the assembly, operation, instal-
lation site and connection of the device. Please read these instructions and tips carefully before you start
operating the device.
Return Shipment/ Original Package
Please keep the original packaging in case a return is necessary. Because of their design, 3D printers are
highly sensitive to impact and are therefore sufficiently protected only when transported in the original
packaging. When using improper shipping, the guarantee and liability claim for the device shall lapse.
Operation
During operations never cut off the power off the unit. This may result in data loss and damages to the
software applications.
Miscellaneous
The information contained within this manual are current at the time of printing. We reserve the right,
however, to make changes at any time and without notice. If there should be a new software available for
your device that has consequences for this manual (like changes in the menus or functions), we will provide
an updated version of the manual under http://german-reprap.com if we feel that it is necessary.
Toxic Threat
Depending on the processed filaments an overheating of the material can pose a toxic threat. The recom-
mended operating temperatures must be strictly complied with. You can find these information on the
labels of the filaments or on our website at http://german-reprap.com.
Safety Switch
The printer is equipped with a built-in thermal protector. It will be automatically switched off with an error
message on overheating when reaching a specific temperature.
Maintenance
The printer must be maintained annually by trained staff. The technical protective equipment and all
mechanical components must be checked for functionality. We also offer a maintenance service. Please send
your inquiry to [email protected]
All work on the 230V mains may only be performed by a qualified electrical specialist. All relevant
safety regulations must be complied with. The originator of improper installation will be liable for
damage caused to property and personnel.
The use of the chemicals that are used to maintain and care the device must be complied with the
applicable regulations appropriately.
Manufactures specifications must be observed unconditionally, as well as the use of recommended
protective clothing and the compliance of dosage instructions. The originator of improper chemical
usage will be liable for damage caused to property and personnel.
As part of your responsibility for your fellow human beings, please save this manual for eventual questions
and give it in case of a resell to the new owner.
78/83
