X500pro
3D printer manual
DRAFT
German
RepRap
Risk of Burn (6.3.11)
Warning:
Risk of burn by the motors, the heated work area as well by the extruded material. Wear gloves if necessary.
Mechanical Risks by the Stepper Motors (6.3.12)
Note: There is a risk of trapping and crushing when setting up the device!
Lid (6.3.13)
The wear and tear on the gas chamber can lead to uncontrolled movement. Daily visual and functionality
tests are prerequisites for a safe operation.
Transport 7.1
The transport is carried out by German RepRap GmbH. The device can by moved by the assembled wheels.
Packed delivery:
Machine weight: 400 Kg
Local requirements for the delivery: forklift, lift truck when a transport via the assembled wheels is not
possible.
• The transport route to the installations site must be of adequate dimensions. Doorways must be at
least 5 cm wider and taller than the package including the transport vehicle.
• The weight of the package including its transporting vehicle must not exceed the maximum weight
load capacity of the used transportation ground.
• The forklift must provide a lifting capacity of at least 150 Kg and a fork length of at least 1000mm
• A lift truck must provide the same properties. The travel path must be free from bumps and barriers.
• The transportation path to the installation site must be kept free form obstacles.
• Transportation via crane is not provided
Forklifts and lift trucks must be operated by trained personnel only. They must have a valid driving license
for the specific device and must be informed about the dangers.
Before starting the work make sure that the assembly instructions and the manual have been read and
understood.
You can attach the transport section of this manual to the package to exclude ambiguities.
82/83
