X500pro
3D printer manual
DRAFT
German
RepRap
12. Tips & Tricks
12.1 How to Determine the 3D Printer’s MAC Address
The MAC address of your X500pro can be identified via the
Dashboard
of
Repetier-Server
.
Please read Chapter
6. Network and Printer Set Up
, there you can find information about how to integrate
your 3D-printer into your network.
After connecting to your printer please select the house-symbol at the upper right corner, this will lead
you to the dashboard.
You are also shown an URL that enables access to the X500pro´s web interface. The also displayed QR
code can be used to access the web interface via mobile device.
12.2 How to Update Repetier-Server
Attention!
Never perform a Repetier-Server upgrade without consulting the support. Only use
updates which were approved by German RepRap!
Before you update your Repetier-Server please make sure, to first make a copy of your license-code and
then deactivate it. To do so click on the
Register
button on the right hand side drop-down menu.
Network settings, X500pro
For updating Repetier-Server you must have an internet connection
68/83
