X500pro
3D printer manual
DRAFT
German
RepRap
It is normal and sometimes inevitable that during the heating process
filament will drip out of the nozzle. It is the leftover filament of the test
prints.
In the Printer Status viewport you should now see rising temperatures for all heating elements as well as the
previous set temperatures.
Important:
Please shut down all heating elements after controlling their function-
ality! You do not have to wait until all temperatures are reached.
In order to turn off an heating element, simply click on it and set a value of zero and confirm it using the
enter button.
3.5 Traverse Movements and Machine-Zero
After reducing the overall machine-speed go to
Move
on the touch-display.
Use the marked arrows to manually
traverse the axis.
Warning:
If the printer will make any kind
of strange noises executing the
command described below, please
turn off the current immediately.
To do so it is sufficient to open the
main lid of the printer.
After assuring that all axis are able to move, please use the command
Home-All
. This will traverse all axis to
its machine zero. This is the position from where all 3D prints will start.
You can find the command
Home-All
in the right upper corner of the touch-display.
Move Head, Touch-Display
X
Y
Z
15/83
