X500pro
3D printer manual
DRAFT
German
RepRap
3.3 Touch Display/ Preparation
In order to familiarize with your 3D printer, its recommended to slow down the travel speed of the printer.
If all axis are traversing slower, you have more time to intervene if, contrary to expectation, problems appear.
Starting from the home screen navigate to
Parameter ( see. p.11)
and turn down
Speed
to 50%.
Printer Status, Touch-Display
3.4 Heating Elements
To verify if all heating elements are working properly, please check if in Printer Status temperatures are dis-
played for
Extruder 1&2
as well as for the
Chamber
and the
Bed.
Please select
Extruder 1
and
Extruder 2
in a row and set the desired temperature to 190°C. Afterwards select
the
Bed
an turn it on to 60°C as well as the
Chamber
.
Printer Status, Touch-Display
14/83
