manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 99 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 99

 

Configuration Menu

 

 

 

89

5

5.5  Recording Schedule  

The schedule is provided to activate I/O monitoring on specified time periods or on special 
days. 

 

5.5.1    I/O Monitoring Settings 

You can set the I/O Monitoring Schedule Settings to enable I/O monitoring. 

 

                                                          Figure 5-14 

„

 

Span 1-3: 

Set different time frames during the day to start I/O monitoring. Each day can 

be divided into 3 time frames, represented by Span 1 to Span 3. The time frame you 
specify is effective from Monday through Sunday. 

„

 

Weekend: 

If you want to have the whole-day monitoring for the weekend, select 

Weekend

, and then define whether your weekend includes 

Saturday and Sunday

 or 

Only Sunday

. 

„

 

Special Day: 

Enable

 

I/O monitoring on a specified day. 

 

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments