GeoVision GV-IP Speed, User Manual, Page: 84 / 164

74
5.1.2 Motion Detection
Motion detection is used to generate an alarm whenever movement occurs in the video image.
You can configure up to 8 areas with different sensitivity values for motion detection.
Figure 5-3
1. The default sensitivity value is 2 for the whole area. To define a different sensitivity value,
click Reset .
2. Select the desired sensitivity by moving the slider. There are three values. The higher the
value, the more sensitive the camera is to motion.
3. Drag an area on the image. Click Add when you are prompted to confirm the setting.
4. To create several areas with different sensitivity values, repeat Steps 2 and 3.
5. Click Save to save the above settings.
6. To trigger the alarm output when motion is detected, select the output (Output 1) and click
the Apply button. To activate the output settings, you must also start Camera monitoring
manually or by schedule. For related settings, see 5.4 Monitoring .