manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 47 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 47

 

Installing the GV-IP Speed Dome

 

 

 

37

2

2.4  Pole Mount  

There are two pole mounting methods: Pole Thin Direct Mount and Pole Thin Box Mount. The 
two mounting methods are suitable for both indoor and outdoor installation. 
   

2.4.1    Pole Thin Direct Mount   

With the optional 

Pole Thin Direct Mount

 and 

Standard/Mini Pendent Mount

, the GV-IP 

Speed Dome can be installed on a pole. 

 

Figure 2-29 

Items needed for the Dome of Indoor Type:   

•

 

GV-IP Speed Dome (Indoor Type) 

•

 

Data Cable (supplied)   

•

 

Ethernet Cable   

•

 

Indoor Mount Kit (optional)   

•

 

Standard/Mini Pendent Mount (optional) 

•

 

Pole Thin Direct Mount (optional)   

•

 

Waterproof Rubber (supplied with Indoor Mount Kit) 

•

 

Stainless Steel Straps (supplied with Pole Thin Direct Mount) for fixing the Pole Thin Direct 
Mount to the wall   

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments