Advanced Applications
111
6
6.3 Restoring to Factory Default Settings
The settings of GV-IP Speed Dome are divided into two categories: PTZ settings and other
settings. Therefore the operations of restoring the two setting categories to original default
values are separate and different.
To restore all settings, except PTZ settings, to default values:
Use the Reset and Default buttons on the GV-IP Speed Dome to perform this action.
1. Press and then release the
Reset
button (No. 1, Figure 1-1 and Figure 1-2) immediately.
2. Press and hold the
Default
button (No. 2, Figure 1-1 and Figure 1-2) until the Ethernet
plug lights out. It may take up to 30 seconds.
3. Release the
Default
button. The loading of default settings is complete, and the Dome
starts rebooting itself.
Note:
Before the Dome completes the reboot, do not unplug the power cable; otherwise the
loading of default values will fail.
To restore PTZ settings to default values:
There are two methods to perform this action. It is highly recommended to use the
Load
Camera Default
button on the Web interface. For this see
4.10 System Configuration
. If it
does not work, use the Communication Switch on the GV-IP Speed Dome. For this see
1.5
Communication Switch.
Summary of Contents for GV-IP Speed
Page 10: ......
Page 81: ...Configuration Menu 71 5 5 1 1 Video Settings Figure 5 2 ...