manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 35 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 35

 

Installing the GV-IP Speed Dome

 

 

 

25

2

2.1.4    Straight Tube Mount (Outdoor Type) 

With the optional 

Straight Tube

, the GV-IP Speed Dome of Outdoor Type can be suspended 

from the ceiling. The Straight Tube is available in two different lengths: 250 mm and 500 mm.   

 

Figure 2-21 

Necessary items include:     

•

 

GV-IP Speed Dome (Outdoor Type) 

•

 

Outdoor Mount Kit (supplied) 

•

 

Data Cable (supplied)   

•

 

Ethernet Cable   

•

 

Straight Tube (optional)   

•

 

Waterproof Rubber (supplied)   

•

 

M5 Standard/Security Screws (supplied) 

•

 

Screws and screw anchors for fixing the Straight Tube onto the ceiling (not supplied)   

 
Follow the steps:   

1.  Ensure that the ceiling can support the weight of the GV-IP Speed Dome and Straight 

Tube. 

2.  Make a cable entry hole on the ceiling. 

3.  Fix the Straight Tube to the ceiling with proper screws and screw anchors. 

4.  Attach the Waterproof Rubber to the Straight Tube.   

5.  Run the Data and Ethernet cables through the Straight Tube. Remember to block the 

cable entry hole with the supplied sponge to prevent insects from entering the tube. 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments