Configuration Menu
75
5
5.2 Digital I/O & PTZ
5.2.1 Input / Output Settings
This section introduces how to configure the I/O devices connected to the GV-IP Speed
Dome.
5.2.1.1 Input Setting
The GV-IP Speed Dome can connect up to 4 input devices.
Figure 5-4
Name:
Edit the input name.
Normal State:
Set up the input state to trigger actions by selecting Open Circuit (N/O) or
Grounded Circuit (N/C).
Latch Mode:
Enable the mode to have a momentary output alarm.
Trigger Digital Output Relay:
Select the output to be triggered once the input is
activated.
Send Video to Center V2:
Select the camera to send the images to Center V2 when the
input is triggered.
Set PTZ camera to preset point:
This option allows you to direct the GV-IP Speed Dome
to a preset point upon input trigger.
Input on:
Direct the GV-IP Speed Dome to a preset point when the input is triggered.
Input off:
Direct the GV-IP Speed Dome to another preset point when the triggered
input is off.
Summary of Contents for GV-IP Speed
Page 10: ......
Page 81: ...Configuration Menu 71 5 5 1 1 Video Settings Figure 5 2 ...