GeoVision GV-IP Speed, User Manual, Page: 104 / 164

94
[IP Speed Dome Streaming Port Settings]
The VSS port enables connecting the GV-IP Speed Dome to the GV-System. The default
setting is 10000.
[UPnP Settings]
UPnP (Universal Plug & Play) is a networking architecture that provides compatibility among
networking equipment, software and peripherals of the 400+ vendors that are part of the
Universal Plug and Play Forum. It means that they are listed in the network devices table for
the operating system (such as Windows XP) supported by this function. Enabling this function,
you can connect to the GV-IP Speed Dome directly by clicking on the GV-IP Speed Dome
listed in the network devices table.
[QoS Settings]
The Quality of Service (QoS) is a bandwidth control mechanism that guarantees
delay-sensitive data flows such as voice and video streams, obtain a certain amount of
bandwidth to keep the streaming smooth.
To apply QoS to GV-IP Speed Dome, all network routers must support QoS and QoS must be
enabled on these devices. To enable the QoS on GV-IP Speed Dome, enter a Differentiated
Services Code Point (DSCP) value. This value is a field in an IP packet that enables different
levels of services for the network traffic. When the video stream from GV-IP Speed Dome
reaches a router, the DSCP value will tell the router what service level should be applied, e.g.
the bandwidth amount. This value ranges from 0 to 63 in decimal format. The default value is
0 which means QoS is disabled. Click
Apply to finish.