manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 80 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 80

 

 

70 

5.1    Video & Motion 

The GV-IP Speed Dome supports dual streams allowing you to set up two different codec and 
resolutions for a single video transmission. In a limited bandwidth network, such as mobile 
phone surveillance, the dual-stream function allow you to have the sub stream with lower 
resolution and codec for live view, and the main stream with highest resolution 704 x 480 and 
codec H.264 for recording at the same time. Two setting pages Streaming 1 and Streaming 2 
are provided for separate setup. 

 

Comparison between Stream 1 and Stream 2: 

Video Setting Options 

Stream 1 

Stream 2 

Watermark Setting 

Yes 

No option. Once this function is 
enabled in Stream 1, the settings in 
Stream 1 will be automatically 
applied to Stream 2. 

Video Resolution 

Different resolutions can be applied to Stream 1 and 2. 

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments