manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 43 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 43

 

Installing the GV-IP Speed Dome

 

 

 

33

2

2.3  Corner Mount 

There are two corner mounting methods: Corner Plate Mount and Corner Thin Box Mount. 
The two mounting methods are suitable for both indoor and outdoor installation. 

 

2.3.1    Corner Plate Mount 

With the optional 

Corner Plate Mount 

and 

Standard/Mini Pendant Moun

t, the GV-IP Speed 

Dome can be mounted on the corner wall.   
 

 

                                                                           

Figure 2-27   

Necessary items for the Dome of Indoor Type: 

•

 

GV-IP Speed Dome (Indoor Type) 

•

 

Data Cable (supplied)   

•

 

Ethernet Cable 

•

 

Indoor Mount Kit (optional) 

•

 

Standard/Mini Pendent Mount (optional)   

•

 

Corner Plate Mount (optional) 

•

 

Waterproof Mount Kit (supplied with Indoor Mount Kit) 

•

 

Screws and screw anchors for fixing the Corner Plate Mount on the wall (not supplied)   

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments