manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 138 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 138

 

 

 

128 

Note:   

1.  For the 3G-enabled mobile phone, you can receive live video from the GV-IP Speed 

Dome without installing any GV mobile applications. 

2.  When users try to connect to the GV-IP Speed Dome via these mobile applications, 

they can only access the live view function. The remote playback, I/O control and PTZ 
control functions are not available. 

 

 

Supported Resolution and Codec

 

Handheld 

Device View 

GV-GView 

V2 

GV-MSView 

V2/ V3 

GV-SSView 

V3 

3GPP 

Viewer 

GV-Eye V1.0 

(Android)  

GV-Eye / HD 

V1.1.2 (iPad / 

iPhone / iPod 

Touch) 

MPEG4 

320 x 240 or below 

320 x 240 

or below 

720 x 480 

or below 

MJPEG 

X X  X X 

H.264 

X X  X X 

1920 x 1080   

or below 

Note:

 A “X” mark indicates the mobile phone application does not support the codec. The live 

view will not be displayed on the mobile phone if you select the unsupported codec. 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments