manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 33 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 33

 

Installing the GV-IP Speed Dome

 

 

 

23

2

2.1.3    Straight Tube Mount (Indoor Type) 

With the optional 

Straight Tube

, the GV-IP Speed Dome of Indoor Type can be suspended 

from the ceiling. The Straight Tube is available in two different lengths: 

250 mm

 and 

500 mm

.  

 

 

           Figure 2-17 

Necessary items include:     

•

 

GV-IP Speed Dome (Indoor Type) 

•

 

Data Cable (supplied)   

•

 

Ethernet Cable   

•

 

Indoor Mount Kit (optional)   

•

 

Straight Tube (optional)   

•

 

Screws and screw anchors for fixing the Straight Tube onto the ceiling (not supplied)   

 
Follow the steps:   

1.  Ensure that the ceiling can support the weight of the GV-IP Speed Dome and Straight 

Tube. 

2.  Make a cable entry hole on the ceiling. 

3.  Fix the Straight Tube to the ceiling with proper screws and screw anchors. 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments