GeoVision GV-IP Speed, User Manual, Page: 67 / 164

PTZ OSD Control Panel
57
4
4.3 Auto Pan Mode Settings
You can set the GV-IP Speed Dome to stay on a panning mode to survey the horizontal view.
Up to 4 Auto Pan modes can be created.
Setting Up an Auto Pan Mode
1. Set the Dome up and down direction first. The height position of the Dome view has to be
set first because the height direction moved after setting the Auto Pan number will do
nothing.
2. Select the panning direction from left to right or vice versa. The default value is from left to
right. Click Option (Figure 4-1) on the PTZ Control Panel, select Setup , click Open , and
select Advanced located under PTZ Setting on the left menu to select the panning
direction. See “Auto Pan” in 4.5 PTZ Setting- Advanced .
3. Click Option (Figure 4-1) on the PTZ Control Panel, click Auto and select Set Auto Pan
1 .
4. Use left and right direction keys to set the start and end points of the panning mode.
5. When you finish the setting, click Option (Figure 4-1), click Auto and select End Auto
Pan 1 .
6. To create another Auto Pan mode, repeat Steps 1 to 3, and select a different Auto Pan
number.
Starting and Stopping an Auto Pan Mode
To start the GV-IP Speed Dome on an Auto Pan mode, click Option (Figure 4-1) on the PTZ
Control Panel, click Auto and select an Auto Pan number which has been previously set.
To stop an Auto Pan mode in action, click on a direction key, home key, zoom button or focus
button on the PTZ Control Panel.