GeoVision GV-IP Speed User Manual Download Page 40

Page: 40 / 164

2.2.2 Mini Pendent Mount

The installation steps of the

Mini Pendent Mount

are the same as those of the Standard

Pendent Mount. For details, see

2.2.1 Standard Pendent Mount

Figure 2-25

Necessary items for the Dome of Indoor Type:

•

GV-IP Speed Dome (Indoor Type)

•

Data Cable (supplied)

•

Ethernet Cable

•

Indoor Mount Kit (optional)

•

Mini Pendent Mount (optional)

•

Waterproof Rubber (supplied with Indoor Mount Kit)

•

Screws and screw anchors for fixing the Mini Pendent Mount on the wall (not supplied)

Necessary items for the Dome of Outdoor Type:

•

GV-IP Speed Dome (Outdoor Type)

•

Outdoor Mount Kit (supplied)

•

Data Cable (supplied)

•

Ethernet Cable

•

Mini Pendent Mount (optional)

•

Waterproof Rubber (supplied)

•

MS Standard/Security Screw (supplied)

•

Screws and screw anchors for fixing the Mini Pendent Mount on the wall (not supplied)

2.2.3 Wall Box Mount

With the optional

Wall Box Mount

and

Standard/Mini Pendent Mount

, the GV-IP Speed

Summary of Contents for GV-IP Speed





































































































































































Search results

Summary of Contents for GV-IP Speed

Reviews:

GeoVision GV-IP Speed, User Manual, Page: 40 / 164

Search results

Summary of Contents for GV-IP Speed

Reviews: