manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 127 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 127

 

DVR Configurations

 

 

 

117

7

6.  Click the listed camera, and select 

Display position

 to map the IP camera to a channel 

on the GV-System.   

 

                                                                   

Figure 7-5   

7.  The Status column now should display “Connected”. Click 

OK

. 

 
Previewing Video and Setting Audio 

To preview video and activate audio recoding, highlight the desired GV-IP Speed Dome and 
select 

Preview & Audio Setting

. This dialog box appears. 

 

                                Figure 7-6   

 

[Preview selected camera] 

„

 

Drop-down List: 

Select the desired camera for live preview.

 

„

 

Preview dual stream record channel: 

The option is only available when the dual stream 

is set, i.e. the cameras for live view and recording are configured differently (Figure 7-4). 
Check this option for recording preview.

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments